D20:Forest Terrain Rules
[top]Forest Terrain
Forest terrain can be divided into three categories: sparse, medium, and dense. An immense forest could have all three categories within its borders, with more sparse terrain at the outer edge of the forest and dense forest at its heart.
The table below describes in general terms how likely it is that a given square has a terrain element in it.
The table below describes in general terms how likely it is that a given square has a terrain element in it.
Category of Forest | |||
---|---|---|---|
Sparse | Medium | Dense | |
Typical trees | 50% | 70% | 80% |
Massive trees | ? | 10% | 20% |
Light undergrowth | 50% | 70% | 50% |
Heavy undergrowth | ? | 20% | 50% |
[top]Trees
The most important terrain element in a forest is the trees, obviously. A creature standing in the same square as a tree gains a +2 bonus to Armor Class and a +1 bonus on Reflex saves (these bonuses don?t stack with cover bonuses from other sources). The presence of a tree doesn?t otherwise affect a creature?s fighting space, because it?s assumed that the creature is using the tree to its advantage when it can. The trunk of a typical tree has AC 4, hardness 5, and 150 hp. A DC 15 Climb check is sufficient to climb a tree. Medium and dense forests have massive trees as well. These trees take up an entire square and provide cover to anyone behind them. They have AC 3, hardness 5, and 600 hp. Like their smaller counterparts, it takes a DC 15 Climb check to climb them.
[top]Undergrowth
Vines, roots, and short bushes cover much of the ground in a forest. A space covered with light undergrowth costs 2 squares of movement to move into, and it provides concealment. Undergrowth increases the DC of Tumble and Move Silently checks by 2 because the leaves and branches get in the way. Heavy undergrowth costs 4 squares of movement to move into, and it provides concealment with a 30% miss chance (instead of the usual 20%). It increases the DC of Tumble and Move Silently checks by 5. Heavy undergrowth is easy to hide in, granting a +5 circumstance bonus on Hide checks. Running and charging are impossible. Squares with undergrowth are often clustered together. Undergrowth and trees aren?t mutually exclusive; it?s common for a 5-foot square to have both a tree and undergrowth.
[top]Forest Canopy
It?s common for elves and other forest dwellers to live on raised platforms far above the surface floor. These wooden platforms generally have rope bridges between them. To get to the treehouses, characters generally ascend the trees? branches (Climb DC 15), use rope ladders (Climb DC 0), or take pulley elevators (which can be made to rise a number of feet equal to a Strength check, made each round as a full-round action). Creatures on platforms or branches in a forest canopy are considered to have cover when fighting creatures on the ground, and in medium or dense forests they have concealment as well.
[top]Other Forest Terrain Elements
Fallen logs generally stand about 3 feet high and provide cover just as low walls do. They cost 5 feet of movement to cross. Forest streams are generally 5 to 10 feet wide and no more than 5 feet deep. Pathways wind through most forests, allowing normal movement and providing neither cover nor concealment. These paths are less common in dense forests, but even unexplored forests will have occasional game trails.
[top]Stealth and Detection in a Forest
In a sparse forest, the maximum distance at which a Spot check for detecting the nearby presence of others can succeed is 3d6×10 feet. In a medium forest, this distance is 2d8×10 feet, and in a dense forest it is 2d6×10 feet.
Because any square with undergrowth provides concealment, it?s usually easy for a creature to use the Hide skill in the forest. Logs and massive trees provide cover, which also makes hiding possible.
The background noise in the forest makes Listen checks more difficult, increasing the DC of the check by 2 per 10 feet, not 1 (but note that Move Silently is also more difficult in undergrowth).
Because any square with undergrowth provides concealment, it?s usually easy for a creature to use the Hide skill in the forest. Logs and massive trees provide cover, which also makes hiding possible.
The background noise in the forest makes Listen checks more difficult, increasing the DC of the check by 2 per 10 feet, not 1 (but note that Move Silently is also more difficult in undergrowth).
[top]Forest Fires (CR 6)
Most campfire sparks ignite nothing, but if conditions are dry, winds are strong, or the forest floor is dried out and flammable, a forest fire can result. Lightning strikes often set trees afire and start forest fires in this way. Whatever the cause of the fire, travelers can get caught in the conflagration.
A forest fire can be spotted from as far away as 2d6×100 feet by a character who makes a Spot check, treating the fire as a Colossal creature (reducing the DC by 16). If all characters fail their Spot checks, the fire moves closer to them. They automatically see it when it closes to half the original distance.
Characters who are blinded or otherwise unable to make Spot checks can feel the heat of the fire (and thus automatically ?spot? it) when it is 100 feet away.
The leading edge of a fire (the downwind side) can advance faster than a human can run (assume 120 feet per round for winds of moderate strength). Once a particular portion of the forest is ablaze, it remains so for 2d4×10 minutes before dying to a smoking smolder. Characters overtaken by a forest fire may find the leading edge of the fire advancing away from them faster than they can keep up, trapping them deeper and deeper in its grasp.
Within the bounds of a forest fire, a character faces three dangers: heat damage, catching on fire, and smoke inhalation.
A forest fire can be spotted from as far away as 2d6×100 feet by a character who makes a Spot check, treating the fire as a Colossal creature (reducing the DC by 16). If all characters fail their Spot checks, the fire moves closer to them. They automatically see it when it closes to half the original distance.
Characters who are blinded or otherwise unable to make Spot checks can feel the heat of the fire (and thus automatically ?spot? it) when it is 100 feet away.
The leading edge of a fire (the downwind side) can advance faster than a human can run (assume 120 feet per round for winds of moderate strength). Once a particular portion of the forest is ablaze, it remains so for 2d4×10 minutes before dying to a smoking smolder. Characters overtaken by a forest fire may find the leading edge of the fire advancing away from them faster than they can keep up, trapping them deeper and deeper in its grasp.
Within the bounds of a forest fire, a character faces three dangers: heat damage, catching on fire, and smoke inhalation.
[top]Heat Damage
Getting caught within a forest fire is even worse than being exposed to extreme heat (see Heat Dangers). Breathing the air causes a character to take 1d6 points of damage per round (no save). In addition, a character must make a Fortitude save every 5 rounds (DC 15, +1 per previous check) or take 1d4 points of nonlethal damage. A character who holds his breath can avoid the lethal damage, but not the nonlethal damage. Those wearing heavy clothing or any sort of armor take a ?4 penalty on their saving throws. In addition, those wearing metal armor or coming into contact with very hot metal are affected as if by a heat metal spell.
[top]Catching on Fire
Characters engulfed in a forest fire are at risk of catching on fire when the leading edge of the fire overtakes them, and are then at risk once per minute thereafter (see Catching on Fire).
[top]Smoke Inhalation
Forest fires naturally produce a great deal of smoke. A character who breathes heavy smoke must make a Fortitude save each round (DC 15, +1 per previous check) or spend that round choking and coughing. A character who chokes for 2 consecutive rounds takes 1d6 points of nonlethal damage. Also, smoke obscures vision, providing concealment to characters within it.
System Reference Document
System Reference Document
This article is a D20 reference page The System Reference Document is a comprehensive toolbox consisting of rules, races, classes, feats, skills, various systems, spells, magic items, and monsters compatible with the d20 System version of Dungeons & Dragons and various other roleplaying games from Wizards of the Coast. |
Created by Last edited by , 10-23-2011 at 11:55 AM 0 Comments, 3,877 Views |
, 02-17-2007 at 09:11 PM
Bookmarks